Sunday, August 16, 2015

Steam Tram in Bern, part 2

The sign on the side of the tram
Another ad on the tram. Go the website and see what it has to say! In case you did not know, the country code for Switzerland is "CH."
1894 must have been a very good year because this tram is still going strong.
Westinghouse made some of the fittings for the tram.

The engine and a carriage, getting ready for a roll thru Bern. The tram is in operation one Sunday a month, and by special reservation. The "Boss" had a special reservation.
The tram uses the modern track, with the old equipment
Inside the carriage there is nice woodwork, newly minted leather straps, and side curtains. We had 18 in our group and the carriage was full. Trouble is, no one sat in the carriage after we got moving. Everyone wanted to see the engine at work.
About half way thru our little trip, we needed to stop for water, a dab of oil and a dab of water conditioner. Seems that Bern has extremely hard water. Without the water conditioner, the tank gets a scale build-up making it impossible to clean, and according to the engineer, the tram is less efficient when the tank is dirty.
The engine with her "skirts" up...here you can see the leaf springs, and the rolling mechanism. Everything is very mechanical...nothing digital or electronic here.
The engineer doing his job. Notice the pile of coal? By the end of the 1 hour journey, the coal pile was just about gone. In addition, the train stopped twice for a top off of water.
The big gauge telling the engineer the pressure in the tank. 
The four men who ran our train: a conductor, an engineer, a fireman, and a look out. BTW, all of them had a specific task and they were busy all the time. There was no featherbedding.
I'll finish with the tail light at the end of the carriage. It was originally a gas light, that was replaced by an electric one somewhere along the way. The fittings are brass, but none of them are spit-spot shiny, but all of them are clean. 












No comments: